JE-H(St)H Bd Z FE180 E30/E90 HALOGEN-FREE INSTALLATION CABLES FOR INDUSTRIAL ELECTRONICS
Marking
BIRTAS KABLO JE-H(St)H…Bd Z FE180 E30/E 90 8 x 2 x 0.80mm 1921 04 008 / Ex PROOF TS 3164 IEC 60331 Part no GOST-R CE ... mt.
Applications
These cables fields of use are fire proof and halogen free cables which, on the basis of a fixed operating mode, can continue with the supply of a power for a period of 180 minutes under the existing fire conditions (at a temperature of 750OC and under the flames ). Also these cables shall satify EN50200 test which is a fire resistant with mechancal shock test (under the conditions at 842oC and mechenical shock) by the classes PH15-PH30-PH60-PH90. And also the test of DIN 4102-12, E30 and E90 which is a sysyem test with all components and cables to satisfy the system circuit integrity. These halogen-free screened installation cables twisted pairs (in pair form) are mainly used for industrial electronics, telecommunication , control, data engineering where low current consumptions are required and transmision of the data must be continuous where the connection of computers, information and transmission systems,the transmission of analogue and digital signals in processor-controlled equipment. Screen provides protection against external pulses. These cables are used at schools, airpots, hospitals, etc. and in the environments which have no corrosive gases are emitted in the event of fire. In case of fire, these cables inhibit the propagation of the flames whereby the development of smoke is extremely low.
Cable Design
Conductor
Plain copper conductor, solid
Insulation
Halogen-free elastomer comp., EN 50290-2-26
Core identification
VDE 0815 (Z) Z: The bundles are marked by means of a numbered helix.
Pair
Two conductors twisted to a pair
Bundle
4 pairs laid up to a bundle
Bundle identification
By spirals with imprinted numbers
Lay-up
Bundles laid up in layers
Separator
Polyester tape
Wrapping
Fiber glass textile tape
Screen
With drain wire under the AL-PES tape Drain wire Phi: 0,80 mm
Outer sheath
HFFR compound, HM4, VDE 0207-24
Sheath colour
RAL 2003, Orange
Technical Data
Standard
VDE 0815
Conductor resistance (loop)
0.80 mm : 73.2 MΩ/km
Insulation resistance
Min. 100 MΩ.km
Mutual Capacitance
Max. 100 nF/km *This value may be exceeded by 20% by cables with up to 4 pairs
Capacity Unbalanced
Max. 200 pF / 100 mt *20% of the values, at least one value up to 400 pF permitted
